Haut-parleurs

Éléments 1 à 10 sur un total de 13

par page
Page:
  1. 1
  2. 2

Grille  Liste 

Définir Direction Descendante
  1. Haut-parleur JBL 2241H

    Haut-parleur JBL 2241H

    599,00 €

    La série LVGC™ regroupe des haut-parleurs basse fréquences de forte puissance. Ils intègrent la technologie Vented Gap Cooling pour un meilleur refroidissement et une structure d’aimant améliorée

    Symmetrical Field Geometry (SFG). Ceci permet d’optimiser la densité de flux pour diminuer la distorsion harmonique du haut-parleur. En évitant ainsi l’utilisation de métaux rares, ces haut-parleurs offrent des
    performances élevées pour un coût mesuré.

    Caractéristiques:

    • Diamètre nominal: 460 mm
    • Impédance: 8 ohms
    • Puissance: 600W AES
    • Réponse en fréquence: 30 Hz - 3 kHz
    • Sensibilité: 98dB SPL
    • Fréquence de coupure: 800 Hz
    • Diamètre d'encastrement: 428 mm
    • Profondeur: 191 mm
    • Poid: 10 kg

     

     

    En savoir plus
  2. MOTEUR BEYMA CP350TI

    MOTEUR BEYMA CP350TI

    249,00 €

    BEYMA CP 350 TI

    Ce moteur contient un dôme en pure titane pour un rendement optimal et un faible taux de distortion. 

     

    - 1” (25 mm) exit compression driver
    - Exceptional power handling: 70 w AES
    - High sensitivity: 104 dB
    - 2” (44.4 mm) voice coil
    - Titanium diaphragm
    - Wide frequency range: 0.8- 20 kHz 

     

    En savoir plus
  3. HAUT PARLEUR BEYMA 15KX

    HAUT PARLEUR BEYMA 15KX

    489,00 €

    HP BEYMA 15 KX  COAXIAL MOTEUR D'AIGU INTEGRE


    . Exceptional power handling: 300 w AES (low frequencies)

    and 100 w AES (high frequencies)

    .Combination of a 15" bass loudspeaker and a 2" exit

    compression driver

    .L.F. unit: 3" (77 mm) edgewound aluminium ribbon voice coil

    H.F. unit: 2.8" (72.2 mm) edgewound aluminium ribbon voice coil

    . Titanium diaphragm compression driver

    . Low weight due to the common magnet system for both units

    .Coherent response

    . Bass loudspeaker designed for the use in compact

    bass-reflex cabinets

    This dual loudspeaker incorporates a 15” bass transducer, featuring a 3” voice coil diameter, edgewound aluminium

    ribbon wire, and a concentrically mounted 2” compression driver into an integrated voice coil gap magnet system. This

    design achieves high efficiency, smooth frequency response, low distortion, reduces phasing problems in the crossover

    region, and simplifies enclosure design.

    L.F. UNIT

    Nominal diameter                                  380 mm. 15 in.

    Rated impedance                                  8 ohms.

    Minimum impedance                     7.3 ohms.

    Power capacity*                                  300 w AES

    Program Power                                     600 w

    Sensitivity                                           99 dB 2.83v @ 1m @ 2_

    Frequency range                                  25-3000 Hz

    Recom. enclosure vol.                           60 / 150 l 2.14 / 5.59 ft.3

    Voice coil diameter                               77 mm. 3 in.

    Magnetic assembly weight                      6.4 kg. 14.11 lb.

    BL factor                                            14.5 N/A

    Moving mass                                        0.070 kg.

    Voice coil length                                   13 mm.

    Air gap height                                      8 mm.

    X damage                                           28 mm.

     

    H.F. UNIT

    Rated impedance                                   8 ohms.

    Minimum impedance                              6.5 ohms @ 1kHz

    Power capacity                                    100 w AES

    Frequency range                                  800 - 17000 Hz

    Sensitivity 1w @ 1m                                       105 dB

    Voice coil diameter                               72.2 mm. 2.8 in.

    Flux density                                         1.4 T

    BL factor                                            7.5 N/A

    Dispersion                                           90°

     

    Resonant Frequency, fs                         45 Hz

    D.C. Voice Coil Resistance, Re                 5.68 ohms.

    Mechanical Quality Factor, Qms              11.4

    Electrical Quality Factor, Qes                  0.519

    Total Quality Factor, Qts                       0.496

    Equivalent Air Volume to Cms, Vas 203 l

    Mechanical Compliance, Cms                   188.4 μm/N

    Mechanical Resistance, Rms                   1.69 kg/s

    Efficiency, ηo (%)                                3.18

    Effective Surface Area, Sd (m2)              0.088 m2

    Maximum Displacement, Xmax                 3.5 mm.

    Displacement Volume, Vd                       300 cm.3

    Voice Coil Inductance, Le@ 1kHz             1 mH

    .Basket:                                            Cast aluminium

    Cone:                                              Paper

    . Surround:                                         Plasticised cloth

    .Voice coil:                                        Edgewound aluminium ribbon

    . Magnet:                                           Ferrite

    H.F. UNIT

    . Diaphragm:                                       Titanium

    . Voice coil:                                        Edgewound aluminium ribbon

    . Voice coil former:                               Kapton

     

    Overall diameter                                   388 mm. 15.28 in.

    Bolt circle diameter                               370 mm. 14.57 in.

    Baffle cutout diameter:

    -Front mount                                                352 mm. 13.85 in.

    -Rear mount                                        355 mm. 13.98 in.

    Depth                                                 180 mm. 7 in.

    Volume displaced by driver                     7 l 0.25 ft.3

    Net weight                                          8.25 kg. 18.19 lb.

    Shipping weight                                    9.25 kg. 20.4 lb.

    En savoir plus
  4. HAUT PARLEUR BEYMA 15G450N

    HAUT PARLEUR BEYMA 15G450N

    399,00 €

    • HAUT PARLEUR BEYMA 15G450
    • 1 UNE PUISSANCE EXCEPTIONNELLE
    • 2 UNE RONDEUR DANS LE GRAVE
    • Article :        Haut-parleur BEYMA 15 G 450N Ø 38 cm 750 W RMS 98 dB 30-1500 Hz Alu 8 ohms
    • Description : Saladier Aluminium / Ø bobine 114 mm /
    •  Poids : 9,9 Kg
    En savoir plus
  5. HAUT PARLEUR BEYMA 12 KX

    HAUT PARLEUR BEYMA 12 KX

    295,00 €

    HAUT PARLEUR COAXIAL AVEC MOTEUR D'AIGU INTEGRE

    Key features :
    Exceptional power handling: 300 w AES (low frequencies) and 100 w AES (high frequencies)
    Combination of a 12" bass loudspeaker and a 2" exit compression driver
    L.F. unit: 3" (77 mm) edgewound aluminium ribbon voice coil
    H.F. unit: 2.8" (72.2 mm) edgewound aluminium ribbon voice coil
    Titanium diaphragm compression driver
    Low weight due to the common magnet system for both units
    Coherent response
    Bass loudspeaker designed for the use in compact bassreflex cabinets

    Technical specifications :

    L.F. UNIT
    Nominal diameter 300 mm. 12 in.
    Rated impedance 8 ohms.
    Minimum impedance 7.1 ohms.
    Power capacity* 300 w AES
    Program Power 600 w
    Sensitivity 98 dB 2.83v @ 1m @ 2
    Frequency range 35-3000 Hz
    Recom. enclosure vol. 40 / 100 l 1.49 / 3.53 ft.3
    Voice coil diameter 77 mm. 3 in.
    Magnetic assembly weight 6.4 kg. 14.11 lb.
    BL factor 14.5 N/A
    Moving mass 0.045 kg.
    Voice coil length 13 mm.
    Air gap height 8 mm.
    X damage 30 mm.

    H.F. UNIT
    Rated impedance 8 ohms.
    Minimum impedance 6.5 ohms.@ 1kHz
    Power capacity 100 w AES
    Frequency range 800 - 17000 Hz
    Sensitivity 1w @ 1m 105 dB
    Voice coil diameter 72.2 mm. 2.8 in.
    Flux density 1.4 T
    BL factor 7.5 N/A
    Dispersion 90°

    Thiel and small parameters :
    Resonant Frequency, fs 45 Hz
    D.C. Voice Coil Resistance, Re 5.6 ohms.
    Mechanical Quality Factor, Qms 10.4
    Electrical Quality Factor, Qes 0.380
    Total Quality Factor, Qts 0.370
    Equivalent Air Volume to Cms, Vas 70 l
    Mechanical Compliance, Cms 186 μm/N
    Mechanical Resistance, Rms 1.49 kg/s
    Efficiency, ηo (%) 2.9
    Effective Surface Area, Sd (m2) 0.055 m2
    Maximum Displacement, Xmax 3.5 mm.
    Displacement Volume, Vd 200 cm.3
    Voice Coil Inductance, Le@ 1kHz 1 mH

    Materials :

    L.F. UNIT
    Basket: Cast aluminium
    Cone: Paper
    Surround: Plasticised cloth
    Voice coil: Edgewound aluminium ribbon
    Magnet: Ferrite

    H.F. UNIT
    Diaphragm: Titanium
    Voice coil: Edgewound aluminium ribbon
    Voice coil former: Kapton

    Mounting informations :
    Overall diameter 320 mm. 12.6 in.
    Bolt circle diameter 300 mm. 11.8 in.
    Baffle cutout diameter: Front mount 286 mm. 11.26 in. / Rear mount 280 mm. 11.02 in.
    Depth 160 mm. 6.30 in.
    Volume displaced by driver 7 l 0.25 ft.3
    Net weight 7.85 kg. 17.31 lb.
    Shipping weight 8.5 kg. 18.73 lb.

    Réponse en fréquence coaxial Beyma 12 KX
    Dimensions haut parleur coaxial Beyma 12 KX

    En savoir plus
  6. HAUT PARLEUR BEYMA 18G50

    HAUT PARLEUR BEYMA 18G50

    499,00 €

    Haut parleur 18 pouces 18G50

    Ce haut parleur 18" a été conçu pour un puissance maximum dans les graves et un très faible taux de distortion.

    High power handling (750 w AES)
    4.5” (114 mm.) edgewound aluminium ribbon voice coil
    Dual spider system
    High efficiency: 4% (98 dB 1w @ 1m)
    Large Xmax: 9 mm.
    Additional heat dissipation due to the use of a metal intercooler
    Designed for high demanding subwoofer and woofer applications

    Technical Specifications :
    Nominal diameter 462 mm. 18 in.
    Rated impedance 8 ohms.
    Minimum impedance 7.4 ohms.
    Power capacity 750 w AES
    Program power 1500 w
    Sensitivity 98 dB  2.83v @ 1m @ 2pi
    Frequency range 25-1500 Hz 
    Recom. enclosure vol. 80 / 200 l 2.8 / 7 ft.3
    Voice coil diameter 114 mm. 4.5 in.
    Magnetic assembly weight 10 kg. 22 lb.
    BL Factor 28.8 N/A
    Moving mass 0.170 kg.
    Voice coil length 25 mm.
    Air gap height 11 mm. 
    X Damage (peak to peak) 40 mm.

    En savoir plus
  7. HAUT PARLEUR BEYMA SM118N

    HAUT PARLEUR BEYMA SM118N

    239,00 €

    Haut Parleur pour enceinte 46 Cm

    - HP Basses 46cm
    - Puissance : 250 Watts RMS Sous 8 Ohms
    - Rendement : 97dB
    - Bande Passante : 25Hz à 3Khz

    Dimensions :
    - Diamètre total : 460m
    - Diamètre de la bobine : 77mm
    - Diamètre d'encastrement : 420mm
    - Profondeur : 182mm

    Poids : 5 Kg

    En savoir plus
  8. HAUT PARLEUR BEYMA 18P1200ND

    HAUT PARLEUR BEYMA 18P1200ND

    559,00 €

    PUISSANCE MAXI  POID  MINI !

     

    HP BEYMA 18P1200 ND

     

    - Real 1200 W AES power handling

    - Sensitivity: 98 dB @ 2.83V

    - 4” duo technology voice coil

    - Forced air convection circuit for low power compression

    - Extended controlled displacement: Xmax ± 9.5 mm.

    - Massive mechanical displacement capability: 52 mm p-p

     POIDS NET 8.5KG

    En savoir plus
  9. HAUT PARLEUR BEYMA 112MI100

    HAUT PARLEUR BEYMA 112MI100

    199,00 €

    12" Loudspeaker

    Nominal diameter 300mm (12")
    Rated impedance 8ohms
    Power capacity 450 w AES
    Program power 900 w
    Sensitivity 100 dB 2.83v @ 1m @ 2p
    Frequency range 40 - 4000 Hz
    Recom. enclosure vol. 20 / 50 l 0.7 / 1.75 ft.
    Magnetic assembly weight 6.5 kg. 14.2 lb.
    Shipping weight 8 kg. 17.6 lb.
    En savoir plus
  10. PAVILLON BEYMA TD590

    PAVILLON BEYMA TD590

    189,00 €

    Technical Specifications :
    Throat diameter  49 mm. 2 in. 
    Horizontal beamwidth  90º (+9º -30º)(-6 dB, 0.63 - 16 kHz)
    Vertical beamwidth  40º (+19º -9º) (-6 dB, 1.6 - 16 kHz)
    Directivity factor (Q)  12.7 (average 0.63 - 16 kHz)
    Directivity index (DI)  11 dB (+1.7 dB, -3.2 dB) 
    Cutoff frequency  800 Hz 
    Dimensions W x H x D:  250 x 280 x 220 mm. 
    Cutout dimensions W x H 215 x 245 mm.
    Net weight 1.2 kg. 
    Shipping weight  2 kg
    Construction  Rigid polyurethane foam.
    Aluminium adaptor.
    Connection of driver by four screws
    on a 4 in. (101.6 mm.) diameter bolt circle.
    Mounting hardware is supplied

    En savoir plus

Éléments 1 à 10 sur un total de 13

par page
Page:
  1. 1
  2. 2

Grille  Liste 

Définir Direction Descendante